Accessories

26 Item(s)

per page

Grid  List 

Set Descending Direction
  • Card Guide CONN

    For easy screwless snap-on mounting of
    connectors accordance to IEC 60 603/
    DIN 41 612.
    With a provision for a spring to contact
    front panels and for contacting a track
    near the PCB edge.
    This snap-in card guides can als be secured with screws.
  • Card Guide ECONOMY

    for subrack FLEXIBLE Card Guide ECONOMY An inexpensive snap-in card guide that can also be secured to the horizontal rails with self tapping screws.


    Technical data


    Material Lexan 500 Color gray


    Continous temperature – 40 °C up to + 115 °C


    Fire protection class UL 94 V–0

  • Card Guide IEEE

    This card guide is in accordance to specification
    IEEE 1101.10.
    The required coding of the IEEE is integrated in the
    card guide head.
    With provision for the IEEE contact spring for groun
    ding of the alignmentpins of the PCB‘s front panel.
    Also with a provision for contacting a track near the
    PCB edge.
    This snap-in card guides can be secured with screws.
  • Card Guide IEEE with 1/2 HP lateral offset

    This card guide is also in accordance to specification
    IEEE 1101.10.
    For CompactPCI-power supplies and for Plug-in units
    fitted with SMD.
    With provision for the IEEE contact spring for groun
    ding of the alignmentpins of the PCB‘s front panel.
    Also with a provision for contacting a track near the
    PCB edge.
    This card guide is secured with screws.
  • Card Guide UNIVERSAL

    This is an allpurpose card guide with provision for a
    spring to contact front panels.
  • Card Guide VARIO

    This is a length variable card guide constructed from 3
    pieces. The center piece can be cut to any length.
    With a provision for a spring to contact front panels.
    These snap-in end pieces can also be secured with
    screws.
  • Card Guide VIB

    Lattice construction for heavy mechanical loads.
    With a provision for a spring to contact front panels
    and for contacting a track
    near the PCB edge.
    This card guides can be snapped in
    and/or secured with screws.

    Two versions:
    1. With pressed-in nut M 2.5
    for assembly to the horizontal rail with
    oval head screws M 2.5 x 12

    2. Without a nut, but one can be added
    in the existing hexagonal molding.
  • Castors

    Kit consists of:
    2 mounting angles
    4 castors
    Installation hardware
  • Coding Head IEEE

    Snapped on the head of standard card guides to comply to the requirements of the specification IEEE 1101.10
    Functions:
    1. Holding the IEEE contact spring for grounding the alignment pins
    of the front panel.
    2. Adapting the IEEE coding pin.
    3. Guiding the 1.6 to 2.4 mm thick PCB.
  • Coding Kit

    with 32 possibilities
    consists of:
    4 coding elements and mounting parts

26 Item(s)

per page

Grid  List 

Set Descending Direction