For subrack FLEXIBLE Card Guide ECONOMY An inexpensive snap-in card guide that can also be secured to the horizontal rails with self tapping screws. Technical data Material Lexan 500 Color gray Continuous temperature – 40 °C up to + 115 °C Fire protection class UL 94 V–0
This card guide is in accordance to specification IEEE 1101.10. The required coding of the IEEE is integrated in the card guide head. With provision for the IEEE contact spring for groun ding of the alignmentpins of the PCB‘s front panel. Also with a provision for contacting a track near the PCB edge. This snap-in card guides can be secured with screws.
This card guide is also in accordance to specification IEEE 1101.10. For CompactPCI-power supplies and for Plug-in units fitted with SMD. With provision for the IEEE contact spring for grounding of the alignment pins of the PCB‘s front panel. Also with a provision for contacting a track near the PCB edge. This card guide is secured with screws.
This is an all purpose card guide with provision for a spring to contact front panels.
This is a length variable card guide constructed from 3 pieces. The center piece can be cut to any length. With a provision for a spring to contact front panels. These snap-in end pieces can also be secured with screws.
Lattice construction for heavy mechanical loads. With a provision for a spring to contact front panels and for contacting a track near the PCB edge. This card guides can be snapped in and/or secured with screws. Two versions: 1. With pressed-in nut M 2.5 for assembly to the horizontal rail with oval head screws M 2.5 x 12 2. Without a nut, but one can be added in the existing hexagonal molding.
The flange can be mounted to the side panel by means of the mounting screws for the horizontal rails. Material: aluminum, extruded Finish: anodized
Flange for Wall Mounting For mounting of a subrack on a wall. Material: aluminum Finish: blank, seawater resistant
This flange is suitable for mounting of a continous front panel of 85 HP and a hinged front panel of 85 HP in a subrack. The flange will be mounted to the side panel by means of the mounting screws for the horizontal rails. Material: aluminum, extruded Finish: colorless chromated
Flange without Nose This flange can be mounted at various depth on the side panel grid. Material: aluminum, extruded Finish: anodized
Material: aluminum Finish: anodized
Rear Cover F 84 HP For covering the wiring field of the subrack
Rear Cover RFI 84 HP Protective wiring rear cover for RFI shielded enclosure. Material: aluminum, 1 mm thick Finish: colorless chromated
Rear Cover RFI 84 HP, inside Protective wiring rear cover for RFI shielded enclosure. Material: aluminum, 1 mm thick Finish: colorless chromated
Rear Profile H22-RFI for screw on rear cover (type delta) For use with a rear cover. Material: aluminum Finish: colorless chromated
Side Panel Connector Join two subracks, one above the other. The side panel connector is mounted to the side panels by means of the mounting screws for the horizontal rails. (nom. depth 160 mm). Material: aluminum, 2 mm thick Finish: blank
Side Panel Extender Elongate a side panel about 60 mm to obtain a larger cabling space. The side panel extender is mounted to the side panel by means of the mounting screws for the horizontal rails. Material: aluminum, 2 mm thick Finish: colorless chromated
Side Panel Fi (flange integrated) The side panel and the flange are extruded in one piece. Material: aluminum, extruded Finish: colorless anodized or colorless chromated
Material: aluminum, extruded Finish: colorless chromated
Material: aluminum, extruded Finish: colorless chromated
Side Panel RFI without flange Material: aluminum, 2.5 mm thick Finish: blank, seawater resistant
For easy screwless snap-on mounting of connectors accordance to IEC 60 603/ DIN 41 612. With a provision for a spring to contact front panels and for contacting a track near the PCB edge. This snap-in card guides can als be secured with screws.
Card Guide with integrated push and pull assist This special card guide with an integral small lever aids in the handling of PCB’s with high pin plug in connectors. The lever is supported by the walls of a special guide chamber when the board is pulled out or pushed in. It is suitable for a spring to contact a track near the PCB edge. This card guides are snapin and can be secured with screws.
20 HP for horizontal mounting of 6 U PCB‘s in 3 U subracks. The horizontal mounting frame needs 52 HP in the width. For 84 HP subracks are available Placed right: 52 HP for horizontal mounting frame, 32 HP for 3 U PCB‘s Placed left: 52 HP for horizontal mounting frame, 1 HP for air and leakage paths, 31 HP for 3 U PCB‘s.
Self adhesive. For identifiying PCB slots in the subrack. The PCB slot number can be read thru the hole in the front panel. Note: The label strip cannot be read while using the RFI spring P2. Material: PC/PE foil Color: yellow/black
This hinged labelling rail is mounted on the subrack flanges. Normally it is placed in front of the front panels. For ejecting a PCB, the rail is turned down.
For locking of PCB‘s witout front panels. The locking rail is mounted at the horizontal rail in front of the PCB‘s. A labeling strip can be insert into a groove.
Mounting Rail B tapped M 2.5 For mounting connectors in accordance to IEC 60 603/ DIN 41 612. For mounting at the rear profile on subracks type alpha with insulating strip and insulating bushings. For mounting at the rear profile on subracks type delta. Material: aluminum Finish: blank
Partition Wall For partitioning of a subrack part. The partition wall 6 U can also be used as a RFI shielded subrack divider in 6 U and 2x3 U parts.
Secures PCB’s without front panels. Used for easy locking and ejecting of PCB’s
Secures PCB without front panels.
Separating Wall For separating a subrack int two fields. Material: aluminum Finish: blank Delivery: 1 separating wall Mounting parts
Subrack Divider Kit 2 x 3 U - 42 HP and 6 U - 40 HP The divider separates a 6 U subrack into a field for 6 U PCB’s and 2 fields of 3 U. Finish: colorless chromated Delivery: 1 double front profile 2xVE1 43 HP chromated 1 double rear profile 2xHK 43 HP anodized 2 divider strips Assembly: Mounting parts
Subrack Divider Kit 2 x 3 U - 84 HP For partitioning a 6 U subrack in 2 x 3 U.
Threaded Strip M 2.5 For attaching the front panels and assembly parts at the wiring field. Material: steel Finish: galvanized, chromated
Threaded Strip M 2.5 - stainless steel For attaching the front panels and assembly parts at the wiring field. This threaded strip is for nonmagnetic applications. Material: stainless steel Finish: blank
Threaded Strip M 2.5 addable This threaded strip could be added to other strips and the space between the holes always adds up 5.08 mm. Material: steel Finish: galvanized, chromated
Threaded Strip M 3 Material: steel Finish: galvanized, chromated
Threaded Strip M 3 addable Material: steel Finish: galvanized, chromated
Z-Rail A tapped M 2.5 For mounting connectors in accordance to IEC 60 603/ DIN 41 612 in subracks type alpha. Mounted on the rear profile. Material: aluminum Finish: colorless chromated
Bearing Bushing 4 for handle 4 HP Material: steel, galvanized Finish: colorless chromated Qty 50 per bag
For covering empty sections or to carry various components in subracks. Four versions are available: 1. Flat front panel blank The front side is covered with a removable transparent foil. 2. Flat front panel anodized Front anodized, rear conductive. 3. Flat front panel RFI Front anodized, rear conductive, with slits in the side edges for insertion of RFI springs. 4. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs for contact. Surface finish is colorless chromated.
Blind Front Panels RFI Finish: flat front panel: front side anodized, rear side conductive extruded front panel: colorless chromated
Blind Front Panels RFI Finish: flat front panel: front side anodized, rear side conductive extruded front panel: colorless chromated
Finish: Flat front panel: front side anodized, rear side conductive Extruded front panel: colorless chromated
Ejector Handle The ejector handle extends through the front panel and is screwed together with the bearing bushing at the front connector.
Front Panels with IEEE Handle For easy pull of PCB’s with high density connectors accordance specification IEEE 1101.10. The assambled handle kit is stuck in the milled space of the front panel and is secured with a clamped spring. Afterwards the PCB are screwed on the intergrated front connector. Two versions with IEEE handle are available: 1. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 2. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs or for contacting. Surface finish is colorless chromated.
Front Panels with Ejector Handle For easy release of PCB’s with high pin connections. The ejector handle is extends through the front panel and is screwed together with the bearing bushing at the front connector. Four versions are available: 1. Flat front panel blank. The front side is covered with a removable transparent foil. 2. Flat front panel anodized. Front anodized, rear conductive. 3. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 4. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs for contact. Surface finish is colorless chromated.
For assembly on a PCB. Handle and front connector are screwed on the front panel. The plain front panel is easy to modify. Four versions are available: 1. Flat front panel blank The front side is covered with a removable transparent foil. 2. Flat front panel anodized Front anodized, rear conductive. 3. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 4. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs for contact. Surface finish is colorless chromated.
Handle FP Assembled with M 2.5 screws and with 1 additional self tapping screw from 6 HP. The handle is held against torsion by means of two nipples.
Hinged Front Panel 85 HP With slits in the side edges for insertion of RFI springs. The hinge is screwed to the profiled rail of the subrack. An 84 HP threaded strip is needed. To be used in combination with below mentioned flanges only. Finish: front side anodized, rear side conductive Delivery: 1 front panel 1 hinge 3 grounding bushings Mounting parts Delivery: as unassembled kit. Assembled kits on request.
Ident Plate for handle FP. The ident plate is markable and printable, snapped in after mounting the handle to the front panel.
Ident-plate 4 HP The ident-plate is markable and printable. Snapped in after mounting the handle at the front panel. Material: aluminum Finish: silver silk matt anodized
Plug-in Front Panel 85 HP The front panel bottom edge is inserted in the groove of a specially profiled rail. With slits in the side edges for insertion of RFI springs. To be used in combination with below mentioned flanges only. Finish: front side anodized, rear side conductive Delivery: 1 front panel 3 grounding bushing M 2.5 3 crosshead screw M 2.5 x 11.3
Cover Plate Fs, slide-in Hole diameter 8.5 mm. The cover plate slides in special slots in the profiles. Material: aluminum, 1.5 mm thick Finish: blank, seawater resistant
Wall and Door Installation Profile Kit For mounting subracks in a door, switch panel etc. The installation profiles are mounted to the side panel by means of the mounting screws to the horizontal rails.
Front Profile VE1 (also rear profile by using of a front panel on the rear). Material: aluminum Finish: anodized
Insulating Strip For insulated mounting of wiring supports, e. g. of the mounting rail B. Mounted between horizontal rail and wiring support.
RFI-spring P2 - 84 (profile/front panel)
Hex Screw, M5-0.8 X 50mm, 100 pcs
For subrack FLEXIBLE Card Guide ECONOMY An inexpensive snap-in card guide that can also be secured to the horizontal rails with self tapping screws. Technical data Material Lexan 500 Color gray Continuous temperature – 40 °C up to + 115 °C Fire protection class UL 94 V–0 For card guide 1.6-220, see part number 409-047-601
M5-0.8 HEX Nut,DIN934, steel chromated, 500pcs
- Integrated washer!
- 1000 pcs per bag
- 4X16
- DIN 933
- 8.8 Steel plain finish
- Full Thread. $0.18 each @ 1000 pcs per bag
- Z-rail - 15HP
- 75mm long
- M2.5 tap
- 14 holes
- 5 pcs per box
- Z-rail - 31HP
- 156mm long
- M2.5 tap
- 30 holes
- 5 pcs per box
-
- Z-rail - 42HP
- 212mm long
- M2.5 tap
- 41 holes
- 5 pcs per box
-
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 83 holes
- 5 pcs per box
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 3.8mm & 2.5mm holes
- 5 pcs per box
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 3.8mm holes
- 5 pcs per box
- Square nut M2.5, 5x5mm
- DIN562
- steel, galvanized, chromated
- Package qty is 500 pcs per bag
- Screw M6x16
- DIN7985
- Pan Head
- Steel, Nickel
- Package qty is 500 pcs per bag
- $0.18 each @ 500 pcs per bag
- Screw, M2.5x20
- DIN84
- Pan Head
- Package qty is 500 pcs per bag
- $.31 each @ 500 pcs per bag.
- Screw, M4x16
- 7mm, Torx T20
- Hexagon Head
- Steel, Galvanized, Chromated
- Package qty is 500 pcs per bag
- $.15 each @ 500 pcs per bag.
- Marking plate
- F3 Poly grey
- Package qty is 100 pcs per bag
- $2.75 each @ 100 pcs per bag.
- Side panel BGT-U
- 3U-160 colorless chromated
- Package qty is 10 pcs per bag
- $24.50 each @ 10 pcs per bag.
- Cover plate 84HP-160
- screw on, colorless chromated
- Package qty is 10 pcs per bag
- $18 each @ 10 pcs per bag.
- Screw M2.5 x10
- Self tapping screw
- DIN7985
- DIN7500
- steel, galvanized, chromated
- Package qty is 250 pcs per bag
- $.11 each @ 250 pcs per bag.
- Screw M2.5x11.3
- Cross head
- Captive Screw
- Package qty is 500 pcs per bag
- $0.31 each @ 500 pcs per bag
Cross Reference:
Same as 3687.051 Wakefield-Vette (3687051)
Same as 345-1362-ND DigiKey (3451362ND)
- Hinge Block Kit
- Pair (Left and Right)
- Includes 409-070-510 and 511
- Package qty is 10 kits per bag
- $18 each @ 10 pcs per bag.
- Order with countersunk screw 409-070-521 M2.5x5
- Card guide
- 1.6-220
- 2.5 nut
- Package qty is 100 pcs per bag
- $1.59 each @ 100 pcs per bag.
- Card guide
- 1.6-220
- Slide-in
- Package qty is 100 pcs per bag
- $1.49 each @ 100 pcs per bag.
- Screw M3.2X12
- Pan head
- ISO 7045
- Captive Screw
- Package qty is 500 pcs per bag
- $.29 each @ 500 pcs per bag.
- Screw M4x12
- Hexagon head, .8mm thick head, Similar to DIN933
- Steel, galvanized, chromated
- Package qty is 500 pcs per bag
- $.31 each @ 500 pcs per bag.
- Screw M2.5x6
- Countersunk, self tapping
- Steel, galvanized, chromated
- Similar to DIN 965
- Similar to DIN 995
- TAPTITE ISO 7046
- Package qty is 500 pcs per bag
- $.09 each @ 500 pcs per bag.
- Screw M2.5x8
- Countersunk, self tapping
- Steel, galvanized, chromated
- DIN 965
- DIN 7500
- TAPTITE
- Package qty is 500 pcs per bag
- $.12 each @ 500 pcs per bag.
- Screw M3.5x13
- Countersunk, sheet metal
- Stainless steel, galvanized, chromated
- DIN7991
- Package qty is 500 pcs per bag
- $.19 each @ 500 pcs per bag.
- Handle 3U
- Anodized aluminum
- 2pcs M4x10
- Torx screw countersunk 409-105-789 included with each handle
- Package qty is 10 pcs per bag
- $19.50 each @ 10 pcs per bag.
- Handle 6U
- Anodized aluminum
- 2pcs M4x10
- Torx screw countersunk 409-105-789 included with each handle
- Package qty is 10 pcs per bag
- $23.75 each @ 10 pcs per bag.
- Handle 3U 32mm L X 30mm D X 8mm W
- Low Profile
- Anodized aluminum
- 2pcs M4x10
- Torx screw countersunk 409-105-789 included with each handle
- Package qty is 10 pcs per bag
- $19.00 each @ 10 pcs per bag.
- Screw
- Self tapping
- 2.5-5
- Package qty is 500 pcs per bag
- $.10 each @ 500 pcs per bag.
- Screw M4x16, DIN933
- Hex head, Steel, galvinized, chromated
- DIN933
- Package qty is 500 pcs per bag
- Screw M2.5x5
- Countersunk
- Cross Head
- Stainless steel
- DIN 965
- Package qty is 500 pcs per bag
- $0.18 each@500 pcs per bag
- Screw M2.5x16
- Countersunk
- Cross Head
- Steel
- DIN 965
- DIN 966
- EN 7046-2
- Package qty is 500 pcs per bag
- $0.15 each@500 pcs per bag
- Screw oval M5-16
- DIN7985
- Pan Head
- Steel
- With Washer DIN125
- Package qty is 100 pcs per bag
- $0.25 each @ 100 pcs per bag
