- Screw
- Self tapping
- 2.5-5
- Package qty is 500 pcs per bag
- $.10 each @ 500 pcs per bag.
- Screw M2.5x11.3
- Cross head
- Captive Screw
- Package qty is 500 pcs per bag
- $0.31 each @ 500 pcs per bag
Cross Reference:
Same as 3687.051 Wakefield-Vette (3687051)
Same as 345-1362-ND DigiKey (3451362ND)
- Screw, M4x16
- 7mm, Torx T20
- Hexagon Head
- Steel, Galvanized, Chromated
- Package qty is 500 pcs per bag
- $.15 each @ 500 pcs per bag.
M5-0.8 HEX Nut,DIN934, steel chromated, 500pcs
For subrack FLEXIBLE Card Guide ECONOMY An inexpensive snap-in card guide that can also be secured to the horizontal rails with self tapping screws. Technical data Material Lexan 500 Color gray Continuous temperature – 40 °C up to + 115 °C Fire protection class UL 94 V–0
- Screw oval M5-16
- DIN7985
- Pan Head
- Steel
- With Washer DIN125
- Package qty is 100 pcs per bag
- $0.25 each @ 100 pcs per bag
- Screw M2.5x16
- Countersunk
- Cross Head
- Steel
- DIN 965
- DIN 966
- EN 7046-2
- Package qty is 500 pcs per bag
- $0.15 each@500 pcs per bag
- Screw M2.5x5
- Countersunk
- Cross Head
- Stainless steel
- DIN 965
- Package qty is 500 pcs per bag
- $0.18 each@500 pcs per bag
- Screw M4x16, DIN933
- Hex head, Steel, galvinized, chromated
- DIN933
- Package qty is 500 pcs per bag
- Handle 3U 32mm L X 30mm D X 8mm W
- Low Profile
- Anodized aluminum
- 2pcs M4x10
- Torx screw countersunk 409-105-789 included with each handle
- Package qty is 10 pcs per bag
- $19.00 each @ 10 pcs per bag.
- Handle 6U
- Anodized aluminum
- 2pcs M4x10
- Torx screw countersunk 409-105-789 included with each handle
- Package qty is 10 pcs per bag
- $23.75 each @ 10 pcs per bag.
- Handle 3U
- Anodized aluminum
- 2pcs M4x10
- Torx screw countersunk 409-105-789 included with each handle
- Package qty is 10 pcs per bag
- $19.50 each @ 10 pcs per bag.
- Screw M3.5x13
- Countersunk, sheet metal
- Stainless steel, galvanized, chromated
- DIN7991
- Package qty is 500 pcs per bag
- $.19 each @ 500 pcs per bag.
- Screw M2.5x8
- Countersunk, self tapping
- Steel, galvanized, chromated
- DIN 965
- DIN 7500
- TAPTITE
- Package qty is 500 pcs per bag
- $.12 each @ 500 pcs per bag.
- Screw M2.5x6
- Countersunk, self tapping
- Steel, galvanized, chromated
- Similar to DIN 965
- Similar to DIN 995
- TAPTITE ISO 7046
- Package qty is 500 pcs per bag
- $.09 each @ 500 pcs per bag.
- Screw M4x12
- Hexagon head, .8mm thick head, Similar to DIN933
- Steel, galvanized, chromated
- Package qty is 500 pcs per bag
- $.31 each @ 500 pcs per bag.
- Screw M3.2X12
- Pan head
- ISO 7045
- Captive Screw
- Package qty is 500 pcs per bag
- $.29 each @ 500 pcs per bag.
- Card guide
- 1.6-220
- Slide-in
- Package qty is 100 pcs per bag
- $1.49 each @ 100 pcs per bag.
- Card guide
- 1.6-220
- 2.5 nut
- Package qty is 100 pcs per bag
- $1.59 each @ 100 pcs per bag.
- Hinge Block Kit
- Pair (Left and Right)
- Includes 409-070-510 and 511
- Package qty is 10 kits per bag
- $18 each @ 10 pcs per bag.
- Order with countersunk screw 409-070-521 M2.5x5
- Screw M2.5 x10
- Self tapping screw
- DIN7985
- DIN7500
- steel, galvanized, chromated
- Package qty is 250 pcs per bag
- $.11 each @ 250 pcs per bag.
- Cover plate 84HP-160
- screw on, colorless chromated
- Package qty is 10 pcs per bag
- $18 each @ 10 pcs per bag.
- Side panel BGT-U
- 3U-160 colorless chromated
- Package qty is 10 pcs per bag
- $24.50 each @ 10 pcs per bag.
- Marking plate
- F3 Poly grey
- Package qty is 100 pcs per bag
- $2.75 each @ 100 pcs per bag.
- Screw, M2.5x20
- DIN84
- Pan Head
- Package qty is 500 pcs per bag
- $.31 each @ 500 pcs per bag.
- Screw M6x16
- DIN7985
- Pan Head
- Steel, Nickel
- Package qty is 500 pcs per bag
- $0.18 each @ 500 pcs per bag
- Square nut M2.5, 5x5mm
- DIN562
- steel, galvanized, chromated
- Package qty is 500 pcs per bag
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 3.8mm holes
- 5 pcs per box
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 3.8mm & 2.5mm holes
- 5 pcs per box
- Z-rail - 84HP
- 425mm long
- M2.5 tap
- 83 holes
- 5 pcs per box
-
- Z-rail - 42HP
- 212mm long
- M2.5 tap
- 41 holes
- 5 pcs per box
-
- Z-rail - 31HP
- 156mm long
- M2.5 tap
- 30 holes
- 5 pcs per box
- Z-rail - 15HP
- 75mm long
- M2.5 tap
- 14 holes
- 5 pcs per box
- Integrated washer!
- 1000 pcs per bag
- 4X16
- DIN 933
- 8.8 Steel plain finish
- Full Thread. $0.18 each @ 1000 pcs per bag
- For subrack FLEXIBLE Card Guide ECONOMY An inexpensive snap-in card guide that can also be secured to the horizontal rails with self tapping screws. Technical data Material Lexan 500 Color gray Continuous temperature – 40 °C up to + 115 °C Fire protection class UL 94 V–0 For card guide 1.6-220, see part number 409-047-601
Hex Screw, M5-0.8 X 50mm, 100 pcs
RFI-spring P2 - 84 (profile/front panel)
Insulating Strip For insulated mounting of wiring supports, e. g. of the mounting rail B. Mounted between horizontal rail and wiring support.
Front Profile VE1 (also rear profile by using of a front panel on the rear). Material: aluminum Finish: anodized
Wall and Door Installation Profile Kit For mounting subracks in a door, switch panel etc. The installation profiles are mounted to the side panel by means of the mounting screws to the horizontal rails.- Cover Plate Fs, slide-in Hole diameter 8.5 mm. The cover plate slides in special slots in the profiles. Material: aluminum, 1.5 mm thick Finish: blank, seawater resistant
Plug-in Front Panel 85 HP The front panel bottom edge is inserted in the groove of a specially profiled rail. With slits in the side edges for insertion of RFI springs. To be used in combination with below mentioned flanges only. Finish: front side anodized, rear side conductive Delivery: 1 front panel 3 grounding bushing M 2.5 3 crosshead screw M 2.5 x 11.3
Ident-plate 4 HP The ident-plate is markable and printable. Snapped in after mounting the handle at the front panel. Material: aluminum Finish: silver silk matt anodized
Ident Plate for handle FP. The ident plate is markable and printable, snapped in after mounting the handle to the front panel.
Hinged Front Panel 85 HP With slits in the side edges for insertion of RFI springs. The hinge is screwed to the profiled rail of the subrack. An 84 HP threaded strip is needed. To be used in combination with below mentioned flanges only. Finish: front side anodized, rear side conductive Delivery: 1 front panel 1 hinge 3 grounding bushings Mounting parts Delivery: as unassembled kit. Assembled kits on request.
Handle FP Assembled with M 2.5 screws and with 1 additional self tapping screw from 6 HP. The handle is held against torsion by means of two nipples.
For assembly on a PCB. Handle and front connector are screwed on the front panel. The plain front panel is easy to modify. Four versions are available: 1. Flat front panel blank The front side is covered with a removable transparent foil. 2. Flat front panel anodized Front anodized, rear conductive. 3. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 4. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs for contact. Surface finish is colorless chromated.
Front Panels with Ejector Handle For easy release of PCB’s with high pin connections. The ejector handle is extends through the front panel and is screwed together with the bearing bushing at the front connector. Four versions are available: 1. Flat front panel blank. The front side is covered with a removable transparent foil. 2. Flat front panel anodized. Front anodized, rear conductive. 3. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 4. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs for contact. Surface finish is colorless chromated.
Front Panels with IEEE Handle For easy pull of PCB’s with high density connectors accordance specification IEEE 1101.10. The assambled handle kit is stuck in the milled space of the front panel and is secured with a clamped spring. Afterwards the PCB are screwed on the intergrated front connector. Two versions with IEEE handle are available: 1. Flat front panel RFI Front anodized, rear conductive. With slits in the side edges for insertion of RFI springs. 2. Extruded front panel RFI Made of extruded aluminum alloy, with slits in the side edges for insertion of RFI springs or for contacting. Surface finish is colorless chromated.
Ejector Handle The ejector handle extends through the front panel and is screwed together with the bearing bushing at the front connector.
